9MM
12MM
Acoustic V Groove Panels
(Horizontal/Vertical/Diagonal & Cureves)
Acoustic V-grooved panels add a distinctive decorative element while enhancing acoustic performance, making them both functional and visually appealing. The groove designs can range from simple and subtle patterns to intricate and complex arrangements, allowing complete customization to complement and elevate the interior design of any space.
Acoustic U Groove Panels
(Horizontal/Vertical/Diagonal & Cureves)
Acoustic U-grooved panels add a distinctive decorative element while enhancing acoustic performance, making them both functional and visually appealing. The groove designs can range from simple and subtle patterns to intricate and complex arrangements, allowing complete customization to complement and elevate the interior design of any space.
KEY FEATURES
- Outstanding sound absorption with amazing look
- Formaldehyde free
- Fire retardant (self-extinguishing)
- No toxic gas when burning
- 100% Polyester Fibr
INSTALLATION METHOD
Surface Preparation
- Make sure the surface (wall/ceiling) is clean, dry, smooth, and dust-free.
- Remove any loose paint, dirt, or grease.
- Mark panel layout/levels as per design.
Apply Synthetic Rubber Adhesive
- Apply Synthetic Rubber Adhesive to the back of the panel in small blobs or continuous beads in a grid pattern.
- Add extra adhesive around the panel edges for stronger bonding.
Fix the Panel
- Carefully place the panel on the marked surface.
- Press firmly and evenly to ensure good contact with the surface.
- Hold for a few seconds until initial grip is achieved.
Level & Align
- Check that the panel is aligned correctly with adjacent panels.
- If required, use temporary supports (tape/props) while adhesive sets.
Finish & Clean Up
- Remove excess adhesive immediately.
- Allow adhesive to fully cure as per manufacturer’s instructions.
- Ensure joints are neat and panels are flush.
